Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who loves the responsive cooking control of gas cooktops but needs an electric oven for baking? Find a dual fuel cooker that offers the best of both worlds.
Gas cooktops are favored by many home chefs who have expertise in the kitchen because of their superior temperature control. They also permit the use of advanced cooking techniques such as charcoaling. These cooktops can be expensive, particularly when you need an additional gas hook-up and electrician to install it.
What is a 13amp outlet?
If you own dual fuel range cooker (also known as an electric and gas oven) is required, you'll need an appropriately rated 13 amp plug. The plug will also need to be wired in the cooker circuit ring by a competent electrician.
This assures that the current that flows through the plug is secure and not too high, which could create an electrical fire risk. The current is controlled by a fuse in the plug. The fuse blows as soon as the current is beyond its capacity. This protects the appliance from an over-charge of electricity.
The fuse is rated at 13 amps as indicated on the top of the plug. it indicates the maximum current that the plug is able to pass without causing damage to the appliance or overheating the socket. When replacing fuses, it's crucial to use the same amp rating as the original. You risk overheating the socket if you replace a fuse using an unrelated rating.
Ceramic 13 amp fuses are very durable, and can withstand the high temperatures from the range cooker. Ceramic elements are also fire-resistant, and thus a better choice than other kinds.
There are a few different ways in which 13 amp plugs can be fitted. It can be connected to an existing live socket and the flex is connected to it by a screw or plastic jaw-type cord clamp. The plug should be placed in a secure position and tightened, making sure that the clamp is secure.
Before connecting the wires, you might need to take off the cardboard wiring diagram which is placed over the pins of certain plugs. It is crucial that the wires are trimmed to the proper length since being too long can cause them to be crushed when the plug cover is replaced. The earth wire should be the longest wire to ensure that it is connected before the neutral and line pins.
How do I connect the 13amp plug?
The majority of dual fuel range cookers sold in the UK are wired to an outlet with a 13 amp rating and this is crucial since ovens draw a substantial amount of current and the standard plug sockets are capable of 10 amps.
In general new appliances must be fitted with a plug at the point-of-sale. This is to ensure compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances might not have a plug and this is the problem.
The first step to take when connecting a cooktop to an existing plug socket is to ensure that the rating of the fuse in the fuse box matches that of the plug. This is very important since a faulty sized fuse could be dangerous.
It is also recommended to ensure that the fuse is completely seated into the cartridge, and that there isn't any movement. Next up is to prepare the flex to be used. The first step is to remove the sheathing from the flex to expose the three conductors that are insulated within. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) with a utility knife without penetrating the individual conductors that are insulated. This nick must be large enough to allow the sheathing and cable to separate as the sheathing is pulled back. Finally, cut off the excess sheathing and leave about 40mm over the flexing end.
The flex is then positioned over the plug, with the earth terminal at the top and neutral and live terminals at the bottom. Using the coloured conductors to guide you, the sheathing is then removed from each pin, and the internal cable is inserted to the appropriate terminal by using the cord grip. If the plug is equipped with a clamp for cords that is screw-type, unwind it and then pull the insulation back to expose the copper wires. Finally, connect each of the conductors insulated to the proper terminal (starting with the earth, then neutral and finally the live) by using the channel that they run through the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for 13amp plugs at 300 volts is 3kw. This is a lot of power, however the standard fuse in the UK plug will not fail until the cable has heated to a dangerous level. A faulty plug or socket may cause a fire so it's important to be aware of how much you are using particularly in the kitchen.
The ceramic fuses that are used in plugtops measure around 25mm and are suitable for mains voltages of 240V. They'll feature a BS kitemark or similar marking on the side, and they contain sand. There are cheaper plastic or glass alternatives but they shouldn't be used with a live plug unless you want to blow up the fuse and possibly be electrocuted!
Most dual fuel range cookers in the UK require hard-wired and are not able to plug directly into a wall socket. They are usually connected using a dedicated cooker circuit, that is only suitable for appliances with a maximum of 20 amps.
Check the ring circuit at your home using the fuse box, or call an electrician nearby. They will be able tell you whether the sockets in your home are on the same ring or separate and if there is a separate circuit for your oven.
The size of your kitchen is a major factor when you decide to purchase a dual fuel range cooker. Luckily, we have a great choice of cookers to fit any space, including compact 50 - 60cm dual fuel models, as well as massive 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
If you're looking for something different, don't worry - we also offer a fantastic selection of electric and gas multifunction cookers. dual range cooker can be used to cook a variety meals such as curries, pasta, and casseroles!
Explore our full range of Cookers in Currys online or head in-store to browse. We provide free home delivery and installation on selected range cookers and we also offer flexible payment options. Our team is on hand to answer any questions you have. Contact us via email or by phone. Credit is subject to status and terms and conditions apply.
What is the maximum current draw of the cooker switch?
There is a lot of confusion regarding the maximum current draw of the cooker switch. The reality is that the majority of cookers aren't made to connect to the standard socket, but rather are hard wired and connected to a specific oven ring circuit. This is because they typically consume more than 20 amps of power when the gas and electric ovens are in use.
So, you won't find a dual fuel range cooker that can be fitted to a standard socket because this would present a very significant fire risk and be against electrical regulations. A professional electrician will always install any new electrical wiring to an appliance in the kitchen and ensure that the load (both the oven and the hob) do not exceed the capacity of supply of the circuit.
Dual fuel range cookers combine the ability to cook with the sensitivity of a gas stove with the precision and accuracy of an electric oven. This is why they're popular among cooks and chefs alike. If you are looking to experiment with different cooking techniques such as searing and grilling, a dual-fuel range cooker is the best option.
When buying a new range cooker you'll have to consider a number of factors like size, performance and price. You will also need gas connections in your home for the appliance. If you aren't sure, it is best to book an appointment with a Gas Safe engineer to inspect your property before installation.
Currys' dual fuel range cookers come in a range of models to suit all budgets. From affordable models by Indesit and Zanussi and our own Essentials collection. If you are looking for something more advanced We have a range of premium JennAir models, that come with a number new features.
When purchasing a new dual fuel range cooker, it is essential to read the owner's manual for specific details on the electrical and gas requirements. You must ensure that your house has a gas hook-up suitable, and you may need to hire a plumber to install this for you if it is required. Depending on the home you'll also have to make sure that you have a cooker ring circuit installed and endorsed by a licensed electrician.